If you possess a pair of sunglasses with glass lenses that are outdated or in need of cleaning, you might consider removing them. However, taking out glass lenses from sunglasses can prove to be a challenging endeavor, demanding both patience and a few basic tools. Here, we'll provide you with a step-by-step guide on how to safely and effectively remove glass lenses from your sunglasses, enabling you to accomplish the task successfully.

1. Gather the tools you need

Before you start removing the lenses, you will need to gather some tools. These include:

  • A microfiber cloth or soft towel
  • A small flathead screwdriver or a similar tool
  • A pair of pliers or tweezers

2. Prepare the sunglasses

The first step is to prepare the sunglasses for lens removal. You can start by cleaning the frames with a microfiber cloth or a soft towel. Make sure to remove any dirt or dust that may be on the frames to avoid scratching the lenses during the removal process.

3. Identify the type of lens

The next step is to identify the type of lens you are dealing with. Some lenses may be held in place by screws or clips, while others may be glued to the frame. Knowing the type of lens will help you determine the best way to remove it.

4. Remove the screws or clips

If your lenses are held in place by screws or clips, use a small flathead screwdriver or a similar tool to gently remove them. Be careful not to scratch the frames or the lenses as you do this. Once you have removed the screws or clips, the lenses should come loose.

5. Heat the glue

If your lenses are glued to the frame, you will need to heat the glue to loosen it. You can do this by placing the sunglasses in a bowl of hot water for a few minutes. Alternatively, you can use a hairdryer to heat the glue directly. Make sure not to overheat the lenses or the frame, as this may damage them.

6. Use pliers or tweezers

Once the glue has been heated, use a pair of pliers or tweezers to gently pull the lenses away from the frame. Be careful not to apply too much pressure or force, as this may damage the lenses or the frame.

7. Clean the frame and lenses

After you have removed the lenses, clean the frames and lenses with a microfiber cloth or a soft towel. Make sure to remove any remaining glue or adhesive from the frames before inserting new lenses.

8. Insert new lenses

Once you have cleaned the frames and lenses, you can insert new lenses if you wish. Follow the instructions that come with the new lenses, or take them to a professional if you are unsure how to do it yourself.


Removing glass lenses from your sunglasses may seem like a daunting task, but with the right tools and a little patience, you can do it safely and effectively. By following the steps outlined in this article, you can remove the lenses from your sunglasses without damaging them, and prepare them for new lenses or a simple clean.

  • Jun 25, 2023
  • Category: Education
  • Comments: 0
Leave a comment

Please note, comments must be approved before they are published